How to install RZCRT series cutting machine (Part I)

Prepare tools first as below.

Step 1 Remove the steel plate which is under the panel position.

Step 2 Remove the lever of the machine structure.

Step 3 Slowly and carefully push the air pump into the equipment's internal.

Step 4 Connect the air pump with these two pumps and lock them tightly.

Normally, the right is the suction pipe, and the left is the exhaust pipe.

Step 5 If the air pump and the position of the pipe orifice are not connected,

 the air pump can be padded to adjust the position.

Step 6 Remove the steel plate of the first part which is at the left side of the machine.

Step 7 Connect the plastic pipe to the corresponding interface of the air pump 

as shown in the video.

Step 8 Power-on.